AUTOMATIC TRANSMISSION FLUID
EMBLEM™ Automatic Transmission Fluid is a DEXRON * III/MERCON* Automatic Transmission Fluid that is designed for both General Motors and Ford. DEXRON III is a General Motors trademark for automatic transmission qualified fluids. MERCON is the new trademarked automatic transmission fluid developed by Ford Motor Company, and all Ford vehicles starting in the 1988 model year with automatic transmissions required MERCON transmission fluids to meet warranty requirements. EMBLEM™ DEXRON III/MERCON Automatic Transmission Fluid is registered and licensed by General Motors and Ford Motor Co.
EMBLEM™ ATF is recommended as a make-up and/or refill automatic transmission fluid for all General Motors cars, vans and light trucks, plus many imported vehicles, which specify DEXRON III fluids. It is superior to and replaces the former DEXRON and Type A, Suffix A fluids. It is recommended for make-up or refill in all Ford vehicle automatic transmissions built since 1984 as well as replacement for Ford M2C138-CJ (Type CJ), and M2C166-H (Type H) fluids, EMBLEM™ ATF is also recommended for use in some Detroit Diesel Allison automatic transmissions where a Type C-3 fluid is specified. It can also be used in other hydraulic systems when recommended or specified by the equipment manufacturers, such as Sundstrand, Denison and Vicers, or where Caterpillar TO-2 fluids are specified.
EMBLEM™ ATF is not recommended for use in certain Ford and imported vehicles where the automatic transmission specifies Ford Type F (ESE-M2C33F) fluid. It should also not be used as a power steering fluid unless specified by the equipment manufacturer.
FEATURES: * Excellent All-Season Protection * Oxidation Stability * Seal Protection * Superior Wear Protection * Corrosion Prevention * Foam Resistance * Controlled Frictional Properties
Typical Properties
| SAE Viscosity Grade | 10W20 |
| Gravity oAPI | 31.6 |
| Viscosity, SUS @ 210 oF | 52.0 |
| Viscosity, SUS @ 100 oF | 195.0 |
| Viscosity, Kin 40 oC cSt | 36.94 |
| Viscosity, Kin 100 oC cSt | 7.39 |
| Brookfield - 40 oC cP | 34,400 |
| Brookfield - 18 oC cP | 1,320 |
| Viscosity Index 1 | 65 |
| Flash Point , oC (oF) | 200(392) |
| Pour Point, oC (oF) | - 45 (- 49) |
| Color (Visual) | Red |
| Total Acid No. (D 664) | 0.52 |
| Total Base No. (D 2896) | 2.2 |
| Foam Sequence 1 (D 892) | 10/0 |
| Foam Sequence 2 (D 892) | 30/0 |
| Foam Sequence 3 (D 892) | 10/0 |
TRANSMISSION FLUID HD TO-4 & ALLISON C-4
EMBLEM™ Transmission Fluid HD is formulated to meet the new Caterpillar TO-4 and Allison C-4 specifications. It is used in power transmissions, wet disc brakes and final drives. It exhibits excellent friction performance, wear protection and oxidation stability. It comes in three viscosity grades, SAE 10W, SAE 30 and SAE 50. These grades are the only grades CATERPILLAR approved for CAT TO-4
Typical Properties
| SAE GRADE | 10W | 30 | 50 |
| Viscosity, SUS @ 210 oF | 45 | 64 | 88 |
| Viscosity, cSt @ 100 oC | 5.7 | 11.3 | 17.6 |
| Viscosity, SUS @ 100 oF | 182 | 463 | 913 |
| Viscosity, cSt @ 40 oC | 39.0 | 100.0 | 197.0 |
| Viscosity Index | 100 | 95 | 95 |
| Gravity oAPI | 29.5 | 27.5 | 25.6 |
| Flash Point COC oF | 410 | 435 | 490 |
| Fire Point COC oF | 435 | 445 | 495 |
| Pour Point oF | - 24 | -8 | 14 |
MEETS: Caterpillar TO-4
Allison C-4
C-4 FLUID
EMBLEM™ Type C-4 is an excellent heavy duty hydraulic fluid recommended for Allison Torqmatic Drives and any other applications where C-4 is specified. C-4 is formulated to provide a high viscosity index fortified with inhibitors to resist rust, oxidation and corrosion while offering protection against harmful deposits.
Typical Properties
| Viscosity, SUS @ 210 oF | 45-47 |
| Viscosity, SUS @ 100 oF | 185 |
| Viscosity Index | 105 |
| Gravity oAPI | 29.3 |
| Flash Point COC oF Min. | 415 |
| Pour Point oF Max. | - 25 |
| Color | Red |
| Rubber Swell Agent | Yes |