WB-HI/TEMP GREASE
Emolube WB-HI/Temp Grease is one of a new generation of lubricants. The development of this grease was necessitated by the introduction of front wheel disc brakes. The sodium base wheel bearing greases that had served for years as well as the modern lithium base greases could not stand up to the high heat that wheel bearings were subjected to with disc brakes. This is an aluminum complex soap grease and will serve well at temperatures up to 500 oF. It is also highly water resistant. With its high melting point and its resistance to water many tough lubrication problems would be solved by its use.
.Typical Properties
| N.L.G.I | GRADE 2 |
| Worked Penetration 60 Strokes | 265-29 |
| Dropping Point oF Min | 530 |
| Soap: Type | Aluminum Complex |
| Soap % | 7.05 |
| Oil: Viscosity, SUS @ 210 oF | 90 |
| Oil Viscosity, SUS @ 100 oC | 1027 |
| Oil Viscosity Index | 97 |
| Oil Pour Point oF | 0 |
| Oil Flash Point COC oF | 530 |
| Rust & Corrosion, ASTM D-1743 | Pass #1 |
| Wheel Bearing Test, Special @ 130 gram, 260 oF | 4 gram |
| Oil Separation, ASTM S-1742 | 1.2 % |
| Filler | Nil |
| Water | Nil |
| Water Washout D-1264 @ 175 oF | 2 % |
| Evaporation D-972, 22 hours @ 210 oF | .3 % |