RUST PREVENT 150K
EMBLEM™ Rust Prevent 150K is a rust preventative that is a formulation of a number of special additives. It contains a diluant that after evaporation leaves a protective coating that does not become hard or brittle. Unlike most other products, this one has the ability to absorb any microscopic water that may be on the metal so that it is not being covered over. It also has an additive that will neutralize the acid left from fingerprints. Rust Prevent 150K can be sprayed, brushed or dipped.
Typical Properties
| Viscosity, SUS @ 100 oF | 31.2 |
| Gravity oAPI | 47.4 |
| Flash Point COC oF | 140 |
| Pour Point oF Max | - 50 |
| % Ash | 0.4 |
| Saponification No. | 0.3 |
ASTM D-1748 Humidity Cabinet
Time
to Failure
|
* Cut with Stoddard Solvent (105oF) Flash Point
RUST PREVENT 70K
EMBLEM™ Rust Prevent 70K is a specially formulated rust preventive that leaves a thin oily coating to protect the part from rust. It has the ability to neutralize acid left from fingerprints. It has a higher flash point so it can be used in hazardous areas. The viscosity is adjusted so it can be pumped through spray nozzles with realitive ease. EMBLEM™ Rust Prevent 70K can be applied by brush, spray or dipping.
Typical Properties
| Viscosity, SUS @ 100 oF | 95 |
| Gravity oAPI | 26.8 |
| Flash Point COC oF | 285 |
| Fire Point COC oF | 320 |
| Pour Point oF Max | - 25 |
EMBLEM™ RUST PREVENT LO
EMBLEM™ Rust Prevent LO is a low odor rust preventative that is a formulation of a number of special additives. It contains a odorless mineral sprits diluant that after evaporation leaves a protective coating that does not become hard or brittle. Unlike most other products, this one has the ability to absorb any microscopic water that may be on the metal so that it is not being covered over. It also has an additive that will neutralize the acid left from fingerprints. Rust Prevent LO can be sprayed, brushed or dipped.
Typical Properties
| Viscosity, SUS @ 100 oF | 31.2 |
| Gravity oAPI | 47.4 |
| Flash Point COC oF | 140 |
| Pour Point oF Max | - 50 |
| % Ash | 0.4 |
ASTM D-1748 Humidity Cabinet
| Time to Failure | ||||||||||||
|
RUST PREVENT S
EMBLEM™ Rust Prevent S has been developed for the customer who prefers a grease like film after the diluant has evaporated. This product can be applied by spraying, brushing or dipping.
Typical Properties
| Viscosity, SUS @ 100 oF | 34.7 |
| Gravity oAPI | 42.4 |
| Flash Point COC oF | 135 |
WAR-ON-RUST
EMBLEM™ War-on-Rust is compounded as an excellent corrosion preventative. It is effective in protecting bright, ground or highly polished steel surfaces.
EMBLEM™ War-on-Rust is a solvent compounded product containing a combination of additives that deposits flexible long-lasting coating that neutralizes the acid of fingerprints and lifts microscopic moisture. This is an essentially dry film that protects steel in storage against high humidity, salt water fog, acid fumes, etc.
EMBLEM™ War-on-Rust can be sprayed, brushed or dipped.
Typical Properties
| Viscosity, SUS @ 100 oF | 33.0 |
| Gravity oAPI | 45.6 |
| Flash Point COC oF | 145 |
| Pour Point oF | - 45 |
HUMIDITY CABINET (ASTM D-1748)
Time to Failure - Sand Blasted Panels 100 hours
Time to Failure - Polished Panels 1440 + hours