BAR & CHAIN OIL
EMBLEM™ Bar & Chain Oil is a blend of premium oils and special additives, specially formulated to extend bar and chain life and provide smooth, easy cutting for any chain saw. It has an adhesive additive to prevent excessive throw-off during operation.
Typical Properties
| SAE GRADE | 30 | 10W |
| Viscosity, SUS @ 210 oF | 65 | 42 |
| Viscosity, SUS @ 100 oF | 500 | 130 |
| Gravity oAPI | 28-30 | 28-30 |
| Texture | Tacky | Tacky |
EMBLEM™ POWERWAY OILS
EMBLEM™ Powerway Oils are formulated with low pour premium base oils to insure lasting quality. The high effective extreme pressure additives provide tackiness to eliminate "chatter" and "squeeze" under pressure when used on machine ways thus prolonging the service and accuracy of the machine tool. EMBLEM™ Powerway oils passes Cincinnati Milacron P-47,P-50,P-53. Available in Grade Nos. 150, 350, 900 and 1100.
Typical Properties
| GRADE | 150 | 350 | 900 | 1100 |
| ISO Viscosity Number | 32 | 68 | 150 | 220 |
| Viscosity, SUS @ 210 oF | 43 | 51-53 | 68-72 | 90-95 |
| Viscosity, SUS @ 100 oF | 140-160 | 330-360 | 850-950 | 1050-1150 |
| Viscosity, cSt @ 40 oC | 29 | 68 | 175 | 205-210 |
| Viscosity, cSt @ 100 oC | 5.3 | 7.9 | 12.6 | 17-20 |
| Gravity oAPI | 28-29 | 27-29 | 26-28 | 26-28 |
| Flash Point COC oF | 370 | 375 | 380 | 380 |
| Pour Point oF | + 10 | + 15 | + 15 | + 15 |
| Color | 2 | 2 | 8 | 8 |
| Texture | Tacky | Tacky | Tacky | Tacky |
| Stick-Slip Ratio (CM test method) | .70 | .70 | .72 | .72 |
Demulsibility in Presense of Soluble Oils (PW 150 & PW 350 only) 80ml. Way- 20ml. Soluble oil Pass-1 day 20ml. Way- 80ml. Soluble oil Pass-1 day 10ml. Way- 90ml. Soluble oil Pass-1 day
AIR DRILL OILS
EMBLEM™ Air Drill Oil is an adhesive type compound developed primarily for lubrication of pneumatic equipment. It contains special emulsifiers, extreme pressure lubricity and anti-rust agents to give high retention properties to air-operated construction and mining equipment even under the most severe conditions including the ill effects introduced by "wet" air.
Typical Properties
| GRADE | 350 | 900 |
| Viscosity, SUS @ 210 oF | 51-53 | 68-72 |
| Viscosity, SUS @ 100 oF | 300-360 | 850-950 |
| Viscosity Index | 60 | 60 |
| Gravity oAPI | 27-28 | 27-28 |
| Flash Point COC oF | 475 | 495 |
| Pour Point oF | + 15 | + 15 |
| Color | 8 | 8 |
| Texture | Tacky | Tacky |
EMBLEM™ ROCK DRILL OIL
EMBLEM™ Rock Drill Oil is especially formulated to satisfy the special lubrication requirements of heavy-duty percussion tools and rock drills under the wet conditions encountered in mining and major construction projects.
Typical Properties
| Grade | 700 |
| Viscosity, SUS @ 210 oF | 65 |
| Viscosity, SUS @ 100 oF | 690-710 |
| Gravity oAPI | 26-28 |
| Flash Point COC oF | 460 |
| Fire Point COC oF | 510 |
| Pour Point oF | - 20 |
| Color | 8 |
| Texture | Tacky |
QUENCH OILS
EMBLEM™ Quench Oils are premium quality products developed to insure superior quenching stability. They are designed to produce a high degree and uniform hardness to steel with minimum evaporation loss or deterioration from continued service.
EMBLEM™ Quench Oil is available in two grades, Quench Oil 100 is recommended for normal service ranging from 130 oF to 150 oF, whereas Quench Oil 250 is formulated for temperatures from 200 oF to 300 oFand is suitable for marquenching with low risk of cracking or distortion to finished product.
Typical Properties
| GRADE | 100 | 250 |
| Viscosity, SUS @ 100 oF | 90-110 | 235-275 |
| Gravity oAPI | 33.0 | 26-28 |
| Flash Point COC oF Min | 400 | 490 |
| Fire Point COC oF | 445 | 545 |
| Pour Point oF Max | + 15 | + 20 |
| Color | Green | Green |
FORM RELEASE AGENT
EMBLEM™ Concrete Form Release Agent facilitates excellent parting characteristics from both wood and metal forms. Provides protection to steel forms during storage. Will not stain concrete.
Typical Properties
| Viscosity, SUS @ 210 oF | 70-80 |
| Gravity oAPI | 26-28 |
| Tackiness | Slight |
HEAT TRANSFER OIL
EMBLEM™ Heat Transfer Oil as the name implies is used to impart heat to a product. It is heated in a closed system and by pumps is circulated through coils or jackets to heat a product. One of the main uses is in black top asphalt plants. Heat Transfer Oil is formulated from highly refined, high viscosity base stock neutrals and specialized anti-oxidants.
Typical Properties
| Viscosity, SUS @ 210 oF | 45 |
| Viscosity, SUS @ 100 oF | 200 |
| Viscosity Index | 75 |
| Gravity oAPI | 28-30 |
| Flash Point COC oF | 390 |
| Fire Point COC oF | 445 |
| Oxidation Inhibited | Yes (2800 hrs.) |
PALEX OILS
EMBLEM™ Palex Oils are low pour naphthenic base pale oils without additives and are best suited where "straight" oils are recommended or preferred. The natural low carbon and detergency keep moving and internal parts clean. Palex oils are ideally suited for air and ammonia compressors and stationary diesel engines in mild service where the low carbon of Palex oil keeps pistons, rings and valves operation clean and trouble free.
Typical Properties
| GRADE | 100 | 300 | 500 |
| Viscosity, SUS @ 100 oF | 110 | 295-315 | 490-525 |
| Gravity oAPI | 27.5 | 25-27 | 25-27 |
| Flash Point COC oF | 315 | 360 | 420 |
| Fire Point COC oF | 355 | 415 | 450 |
| Pour Point oF | - 15 | 0 | 0 |
| Color | 1.5 | 2.0 | 2.5 |
EMBLEM™ N-150 OIL
EMBLEM™ N-150 Oil is a straight mineral oil blend of naphthenic base stocks.
Typical Properties
| Viscosity, SUS @ 210 oF | 40 |
| Viscosity, SUS @ 100 oF | 150 |
| Gravity oAPI | 26-28 |
| Flash Point COC oF | 390 |
| Pour Point oF | 0 |
| Color | 1.5 |
EMBLEM™ POWER STEERING FLUID
EMBLEM™ POWER STEERING FLUILD is formulated using highly refined base stocks and special additives to meet the latest O.E.M. specifications. This product can be used for GM's Saginaw, FORD M2C128D, CHRYSLER MS1872 and AMC4060. EMBLEM™ POWER STEERING FLUID will blend with all Power Steering fluidis on the market.
Typical Properties
| Pounds per U.S. Gals @ 15.6oC | 7.35 |
| Specific Gravity API | 31.5 |
| Vis @ 40 oC cst | 47.1 |
| Vis @ 100 oC cst | 8.1 |
| Flash Point oF | 390 |
| Color | +2 |
| Zn ppm | 112 |
| Ca ppm | 100 |
| S ppm | 816 |
| P ppm | 337 |
AIR LINE LUBE 100
EMBLEM™ Air Line Lube 100, as the brand name indicates, is formulated for use in compressed air line lubricators. This product contains an emulsifier to aid in keeping the lines free of moisture as it lubricates, prolonging the life of air driven components. A rust preventative has been added to protect metal parts form rust.
Typical Properties
| Viscosity, SUS @ 100 oF | 105-110 |
| Gravity oAPI | 28-30 |
| Flash Point COC oF | 380 |
| Fire Point COC oF | 420 |
| Color | 2 |
HIVAC 26
EMBLEM™ Hivac 26 is a high quality, non-additive mineral oil for use in vacuum pumps, engine and bearing lubrication.
EMBLEM™ Hivac 26 features low carbon forming characteristics which minimizes carbon build-up on compressor discharge valves and hot machine surfaces.
EMBLEM™ Hivac high viscosity index assures minimum change in viscosity due to temperature change.
Typical Properties
| Viscosity, SUS @ 210 oF | 47 |
| Viscosity, SUS @ 100 oF | 207 |
| Viscosity Index | 105 |
| Gravity oAPI | 26-28 |
| Flash Point COC oF | 410 |
| Pour Point oF | 0 |
| Color, ASTM D 1500 Max | 1.0 |
CYLINDER OIL 6%
EMBLEM™ Cylinder Oil is an universal compounded oil designed for use in steam pumps and engines, air compressors and low speed worm gear drives.
Typical Properties
| Viscosity, SUS @ 210 oF | 145-165 |
| Gravity oAPI | 26-28 |
| Flash Point COC oF | 500 |
| Pour Point oF Max | 15 |
| Color | Dark Green |
| Acidless Tallow | 6 |
| Carbon Residue % | 3 |
AIR COMPRESSOR OILS
EMBLEM™ Air Compressor Oils are formulated with naphthenic base oils which have less tendency to absorb moisture than the high viscosity index paraffinic oils. These compressor oils are rust, oxidation and anti-wear inhibited as well as anti-foam treated. They are available in two grades.
Typical Properties
| GRADE | 300 | 500 |
| Viscosity, SUS @ 210 oF | 47 | 51 |
| Viscosity, SUS @ 100 oF | 310 | 500 |
| Flash Point COC oF Min | 420 | 455 |
| Pour Point oF Max | 0 | + 10 |
| Anti-Foam Treated | Yes | Yes |
| Oxidation Inhibited | Yes | Yes (2500 hrs.) |
| Rust Inhibited | Yes | Yes |
| Anti-Wear Treated | Yes | Yes |
CYLINDER OIL 600 SR
EMBLEM™ Cylinder Oil 600 SR is an heavy viscosity base oil designed for use where a thick film of oil is needed such as a low speed worm gear drives.
Typical Properties
| Viscosity, SUS @ 210 oF | 140-165 |
| Gravity oAPI | 26-28 |
| Flash Point COC oF | 500 |
| Pour Point oF Max | + 15 |
| Color | Dark Green |
| Carbon Residue % | 3.0 |
PENETRATING OIL
EMBLEM™ Penetrating Oil is the ultimate product for freeing all rusted and corroded metal parts. The unique formula of "creeping" agents and oils which, in combination permits faster action than any other products of its type.
USES
| Industry: | Any frozen, corroded or rusted fitting, nut bolt, valve, piston or ring, virtually anything stuck. Ideal for lubrication of tight fitting parts. |
| Automotive: | Heat rises, bolts, locks, hinges, brake cables, linkages and manifold bolts. |
| Farm: | Ideal for farm machinery maintenance. |
| General: | Provides easy penetration for wood or metal screws; excellent lubrication for any frozen metallic part; thousands of uses. |
R.R. JOURNAL OIL
EMBLEM™ R.R. Journal Oil is a premium grade, high viscosity index, low pour product meeting the specification AAR-M-963-79. This product is formulated with a heavy duty additive which will protect new bearings during the critical break-in period and minimize friction in heavily loaded bearings. In addition to the rust and corrosion protection afforded by the heavy duty additive, it is further enhanced with detergency characteristics which help to prevent any buildup on the bearings. EMBLEM™ R.R. Journal Oil is formulated for year-round use and is recommended for plain journal waste saturation or pad lubrication or free oiling.
Typical Properties
| Viscosity, SUS @ 100 oF | 285 |
| Viscosity, SUS @ 210 oF | 53.0 |
| Viscosity Index 100 Min. | 109 |
| Gravity oAPI | 29.3 |
| Flash Point COC oF | 430 |
| Fire Point COC oF | 470 |
| Pour Point oF | - 25 |
EMBLEM™ R-68 OIL
EMBLEM™ R-68 Oil is developed primarily for ammonia compressors where the manufacturer prefers a pour-depressed oil. EMBLEM™ R-68 may also be used to lubricate industrial ice machines as well as air compressors and some ball and roller bearings.
Typical Properties
| Viscosity, SUS @ 100 oF | 300-315 |
| Gravity oAPI | 29-31 |
| Flash Point COC oF | 415 |
| Fire Point COC oF | 465 |
| Pour Point oF | - 25 |
| Color | 2.0 |
FORM OIL "R"
EMBLEM™ Concrete Form Oil R is a blend of high quality base oils and additives, formulated to provide a product that will preferentially wet metal and wood forming materials. EMBLEM™ Concrete Form Oil R will provide excellent parting characteristics from both wood and metal forms. It also adds rust protection to metal forms during storage and does not stain concrete.
Typical Properties
| Viscosity, SUS @ 100 oF | 105 |
| Gravity oAPI | 27 |
| Flash Point COC oF | 315 |
| Pour Point oF | - 15 |
| Color | 1 + |