EMOLUBE E.P. GREASE
These greases are similar to the Emolube Grease being formulated from lithium soaps and the same highly refined high V.I. oils as well as rust and oxidation inhibited. However, for the tougher lubrication applications that exist they have been fortified with unique extreme pressure additive to prevent any metal to metal contact under the most severe conditions.
Emolube 300 AEP as a N.L.G.I. No. 00 is ideal for centralized lubrication systems through small lines. It is very satisfactory in certain gear boxes that call for 00 EP grease.
Emolube 300 EP as a N.L.G.I. No. 0 grease commonly used in centralized lubrication systems where the grease is used to seal out water and dirt.
Emolube 301 EP as a N.L.G.I. No. 1 grade lubricant that is ideal for automatic dispensing equipment. It serves well as a winter grade lubricant in cold weather applications such as mining, quarry operations and construction.
Emolube 302 EP is a N.L.G.I. No. 2 lubricant that is most popular for general lubrication whether it be automotive, farm, construction or mining, it assures that extra protection.
Typical Properties
| 300AEP | 300 EP | 301 EP | 302 EP | |
| N.L.G.I. Grade | 00 | 0 | 1 | 2 |
| Worked Penetration | 400-420 | 355-385 | 310-340 | 265-295 |
| Dropping Point oF | N/A | 325 | 330 | 330 |
| Oxidation Stability # Loss/100 hrs. | N/A | 5 | 5 | 5 |
| Bearing Corrosion Test Rating D-1743 | N/A | Nil | Nil | Nil |
| Timken # OK Load Min | 40 | 45 | 45 | 45 |
| Shell Roll Test % Change | N/A | N/A | 10 max | 15 max. |
| Soap Type | Lithium | Lithium | Lithium | Lithium |
UNIPLEX NO. 2
Uniplex No. 2 is a Lithium Complex Grease that has an extreme range of applications such as off-road equipment, trucks, automobiles, and industrial equipment. It is recommended for all wheel bearings, universal joints, chassis, ball and roller bearings, throw-out bearings, and electric motors.
Uniplex No. 2 offers many advantages such as:
| Excellent metal adhesion | Extreme pressure protection |
| Water resistant | Resists break-down under load conditions |
| Rust protection | Compatible with most other greases |
| Long Life | Affords low/high temperature protection |
Typical Properties
| N.L.G.I. GRADE | 2 | ||||||||||||||||||||
| Dropping Point, D-2265 oF | 570 | ||||||||||||||||||||
| Water Washout, D-1264 | |||||||||||||||||||||
| % Loss @ 100 oF | 2 | ||||||||||||||||||||
| % Loss @ 175 oF | 5 | ||||||||||||||||||||
| Low Temp. Torque | |||||||||||||||||||||
| ASTM G-3-11 |
|
||||||||||||||||||||
| Torque @ - 40 oC., N.M. |
|
| Separated Mineral Oil: | |
| Viscosity, SUS @ 100 oF | 590 |
| Viscosity, SUS @ 210 oF | 69 |
| Viscosity Index | 100 |
| Flash Point, COC oF | 465 |
| Fire Point, COC oF | 500 |
| Pour Point, oF | - 25 |
| Thickener, Type | Complex Lithium 12-OH |
| Thickener, % | 6-9 |
| Color & Texture | Medium Amber - Smooth - Buttery |
EMOLUBE 341
Emolube 341 is a heavy asphaltic prediluted open gear compound for special, heavy loaded, slow speed applications. It can be applied by either brush or spray and serves well through automatic applicators.
Emolube 341W is the winter grade and contains a fast evaporating diluent that eases application in extremely cold conditions but quickly reverts to what would be a normal Emolube 341.
Typical Properties
| 341 | 341W | |
| Viscosity, SUS @ 100 oF Finished Blend | 500-750 | 200-400 |
| Timken # OD Load Min. | 50 | 50 |
| Shell 4 Ball | Pass | Pass |
| Copper Strip | Pass | Pass |
MOLY EP GREASE
Emolube 292 is a Moly Extreme Pressure grease formulated from high quality lithium soaps, high quality refined petroleum oil, plus the addition of molybdenum disulfide. The percentage of moly is very critical and thorough research has been done to insure that this grease carries the correct percentage of moly to produce optimum results. The moly additive provides extra lubrication for vital, hard to lubricate applications where boundary lubrication is encountered. This is an excellent grease for all around lubrication in farm, mining, construction, automotive and industrial applications.
Typical Properties
| N.L.G.I. GRADE | 2 |
| Worked Penetration | 265-295 |
| Dropping Point oF Min | 350 |
| Timken OK Load Min. | 40 |
| Rust D-1743 Pass | 1,1,1 |
| % Moly | 3 |
WB-HI/TEMP GREASE
Emolube WB-HI/Temp Grease is one of a new generation of lubricants. The development of this grease was necessitated by the introduction of front wheel disc brakes. The sodium base wheel bearing greases that had served for years as well as the modern lithium base greases could not stand up to the high heat that wheel bearings were subjected to with disc brakes. This is an aluminum complex soap grease and will serve well at temperatures up to 500 oF. It is also highly water resistant. With its high melting point and its resistance to water many tough lubrication problems would be solved by its use.
.Typical Properties
| N.L.G.I | GRADE 2 |
| Worked Penetration 60 Strokes | 265-29 |
| Dropping Point oF Min | 530 |
| Soap: Type | Aluminum Complex |
| Soap % | 7.05 |
| Oil: Viscosity, SUS @ 210 oF | 90 |
| Oil Viscosity, SUS @ 100 oC | 1027 |
| Oil Viscosity Index | 97 |
| Oil Pour Point oF | 0 |
| Oil Flash Point COC oF | 530 |
| Rust & Corrosion, ASTM D-1743 | Pass #1 |
| Wheel Bearing Test, Special @ 130 gram, 260 oF | 4 gram |
| Oil Separation, ASTM S-1742 | 1.2 % |
| Filler | Nil |
| Water | Nil |
| Water Washout D-1264 @ 175 oF | 2 % |
| Evaporation D-972, 22 hours @ 210 oF | .3 % |