Our Products

• Motor Oils
• Transmission Fluid
• Hydraulic Oils
• Rust Prevent Oils
• Oil Additives
• Cutting Oils
• Gear Oils
• Industrial Oils
• Greases
• Light Products

APG SAE 80W/90

EMBLEM™™ APG SAE 80W/90 is a multi-purpose sulphur/phosphors-type gear lubricant, made from highly refined base oils containing very low level of a highly effective V.I. Improver, and fortified with extreme pressure, anti-wear, "limited slip", corrosion inhibitor, rust preventatives, pour point depressant, and foam suppressant additives.

Typical Properties

^{EMBLEM™ APG SAE 80W/90 meets or exceeds the performance requirements of the following:}

^{API GL-2 through GL-5}

^{Military MIL-L-2105C}

^{Mack GO-H PG-1 PG-2}

APG SAE 85W/140

EMBLEM™ APG SAE 85W/140 is an universal multi-viscosity single grade extreme pressure gear lube designed for year round use when weather conditions require an SAE range from 85 to 140. May be used universally when a single grade is specified.

Typical Properties

 

EMBLEM™ APG SAE 85W/140 meets or exceeds the performance requirements of the following:

API GL-2 through GL-5
Military MIL-L-2105D
Mack GO-H PG-1 PG-2

MINERAL GEAR OIL

EMBLEM™ Mineral Gear Oils are manufactured from same high quality base stocks used in the proven EMBLEM™ APG product line, fortified with defoamers and rust and oxidation inhibitors for lasting trouble free and sludge free performance. EMBLEM™ mineral gear oils meet API GL-1 as well as AGMA R & O service classifications where low to moderate loading at moderate to high temperatures are encountered. Available in SAE grades 90, 140 and 250.

Typical Properties

APG SERIES (LIMITED SLIP) EP GEAR LUBE

EMBLEM™ APG Gear Lube is a multi-purpose, extreme pressure gear lubricant with excellent resistance to rust oxidation and foaming. APG series is an universal lubricant designed for use in the manual transmissions and standard differentials of passenger cars, trucks, farm tractors and equipment, industrial gear cases and construction equipment, and meets military specification MIL-L-2105D and API service requirements GL-2 through GL-5, and is available in SAE Grades 80, 90, 140 and 250. Recommended for GM, Ford, Chrysler and AMC passenger cars, drive and gear systems of Hypoid gears, Eaton Spiral bevel and hypoid axles, Caterpillar , Marion Power shovel, Mack GO-B, C, E, F, H & J., International Harvester, Clark, GMC Truck, Autocar, Brockway, Diamond Reo, Chevrolet, Dodge, Ford and proposed category PG-2. EMBLEM™ APG Gear Lubes are also recommended for gear units of outboard motors and axles where sulfur/phosphorous extreme pressure lubricants are designated. These products can be used where a heavy duty limited slip oil is required.

Typical Properties

INDUSTRIAL GEAR LUBRICANT 150

EMBLEM™ Industrial EP Gear Lubricant 150 meets all the requirements of AGMA standard specification 250.04, dated September 1981, for extreme pressure gear oils. It is formulated with a sulfur-phosphorus EP additive that enables gears to withstand shock loads which would otherwise be destructive. EMBLEM™ Industrial EP Gear Lubricant 150 has excellent oxidation and thermal stability. It also has excellent foaming and air release characteristics and can be applied by misting systems as well as oil bath circulating systems and other lubricant devices.

Typical Properties

INDUSTRIAL GEAR LUBRICANT 220

EMBLEM™ Industrial EP Gear Lubricant 220 meets all the requirements of AGMA standard specification 250.04, dated September 1981, for extreme pressure gear oils. It is formulated with a sulfur-phosphorus EP additive that enables gears to withstand shock loads which would otherwise be destructive. EMBLEM™ Industrial EP Gear Lubricant 220 has excellent oxidation and thermal stability. It also has excellent foaming and air release characteristics and can be applied by misting systems as well as oil bath circulating systems and other lubricant devices.

Typical Properties

INDUSTRIAL GEAR LUBRICANT 320

EMBLEM™ Industrial EP Gear Lubricant 320 meets all the requirements of AGMA standard specification 250.04, dated September 1981, for extreme pressure gear oils. It is formulated with a sulfur-phosphorus EP additive that enables gears to withstand shock loads which would otherwise be destructive. EMBLEM™ Industrial EP Gear Lubricant 320 has excellent oxidation and thermal stability. It also has excellent foaming and air release characteristics and can be applied by misting systems as well as oil bath circulating systems and other lubricant devices.

Typical Properties